PSE-1DLC
樹脂 加工用超硬1枚刃エンドミル
Previous
Next
切削条件参考
| 被削材 | 樹 脂 | アルミ合金 | ||||
|---|---|---|---|---|---|---|
| 刃 径 mm | 回転数 min-1 | 送り速度 ㎜/min | 切り込み深さ | 回転数 min-1 | 送り速度 ㎜/min | 切り込み深さ |
| 0.1～0.2 | 32,000 | 130 | 0.1 | 32,000 | 80 | 0.05 |
| 0.3～0.5 | 32,000 | 140 | 0.2 | 32,000 | 90 | 0.07 |
| 0.6～0.9 | 26,500 | 170 | 0.5 | 32,000 | 120 | 0.15 |
| 1.0～1.4 | 16,000 | 250 | 0.8 | 22,500 | 200 | 0.5 |
| 1.5～1.9 | 10,500 | 350 | 1.2 | 16,000 | 220 | 0.7 |
| 2.0～2.4 | 8,000 | 350 | 1.4 | 12,000 | 250 | 1 |
| 2.5～3.0 | 6,300 | 370 | 1.8 | 9,500 | 270 | 1.2 |
製品ラインナップ
単位 [寸法：mm／価格：円]
Unit [size：mm／Retail Price：JPY]
| 品 番 | 刃径 D | 刃長 ℓ | 全長 L | 柄径 d | 標準価格 |
|---|---|---|---|---|---|
| PSE-1001DLC | 0.1 | 0.5 | 50 | 3 | 13,000 |
| PSE-1002DLC | 0.2 | 1 | 50 | 3 | 9,500 |
| PSE-1003DLC | 0.3 | 2 | 50 | 3 | 7,800 |
| PSE-1004DLC | 0.4 | 2.5 | 50 | 3 | 7,300 |
| PSE-1005DLC | 0.5 | 2.5 | 50 | 3 | 7,300 |
| PSE-1006DLC | 0.6 | 2.5 | 50 | 3 | 6,700 |
| PSE-1007DLC | 0.7 | 3 | 50 | 3 | 6,700 |
| PSE-1008DLC | 0.8 | 4 | 50 | 3 | 6,200 |
| PSE-1009DLC | 0.9 | 4 | 50 | 3 | 6,200 |
| PSE-1010DLC | 1 | 4 | 50 | 3 | 6,200 |
| PSE-1011DLC | 1.1 | 5 | 50 | 3 | 6,200 |
| PSE-1012DLC | 1.2 | 5 | 50 | 3 | 6,200 |
| PSE-1013DLC | 1.3 | 5 | 50 | 3 | 6,200 |
| PSE-1014DLC | 1.4 | 5 | 50 | 3 | 6,200 |
| PSE-1015DLC | 1.5 | 6 | 50 | 3 | 6,200 |
| PSE-1016DLC | 1.6 | 6 | 50 | 3 | 6,200 |
| PSE-1017DLC | 1.7 | 6 | 50 | 3 | 6,200 |
| PSE-1018DLC | 1.8 | 7 | 50 | 3 | 6,700 |
| PSE-1019DLC | 1.9 | 7 | 50 | 3 | 6,700 |
| PSE-1020DLC | 2 | 8 | 50 | 3 | 6,700 |
| PSE-1021DLC | 2.1 | 8 | 50 | 3 | 6,700 |
| PSE-1022DLC | 2.2 | 8 | 50 | 3 | 6,700 |
| PSE-1023DLC | 2.3 | 8 | 50 | 3 | 6,700 |
| PSE-1024DLC | 2.4 | 8 | 50 | 3 | 6,700 |
| PSE-1025DLC | 2.5 | 9 | 50 | 3 | 7,300 |
| PSE-1026DLC | 2.6 | 9 | 50 | 3 | 7,300 |
| PSE-1027DLC | 2.7 | 9 | 50 | 3 | 7,300 |
| PSE-1028DLC | 2.8 | 12 | 50 | 3 | 7,500 |
| PSE-1029DLC | 2.9 | 12 | 50 | 3 | 7,500 |
| PSE-1030DLC | 3 | 12 | 50 | 3 | 7,500 |