Features
KYOWA products with special features
SBRET-4
CBN 4 Flutes Spiral Corner R Endmill
Direct cutting for Highly hardened material and Quenching steel
Size : φ2.0xR0.1~φ6.0xR0.3
BHR-4
CBN 4 Flutes Reamer
Possible to process with high accuracy, high quality and long tool life
Size : φ1.5~φ6.03
BUMW-4
CBN Backside Cutter Double
Possible to process with high accuracy, high quality and long tool life
Size : φ1.5~φ6.0 (chamfer angle 45°)
BMC-3
CBN3 Flutes V Type Endmill
Direct cutting for Highly hardened material and quenchingsteel
Size : φ0.5~φ6.0 (chamfer angle 45°)
BNC-2
CBN 2 Flutes Thread Cutter
Direct cutting for Highly hardened material and quenchingsteel
Size : φ2.0~φ6.0 (thread angle 60°)
KSV-2/YSV-2
Tungsten Carbide Center V Endmill
line-upped small diameter with edge angle
Size : φ0.3~φ6.0
Tip angle : 30°, 45°, 60°, 70°, 80°, 90°, 120°
KDD-2
Tungsten Carbide 2 Flutes Step Drill
Twist Angle 30°at both Small Flute Diameter and Large Flute Diameter
Size : φ0.5~φ6.0
CR-LS-YSPS
Resin Processing Tungsten Carbide 2 Flutes Long Shank Corner R Endmill
Excellent sharpness due to blade design specifically designed for resin
Size : φ6.0xR0.2~φ12.0xR3.0
KMSE-2/KSE-2/YSEDS
Tungsten Carbide Endmill
Line-upped at pitch 0.01
Size : φ0.1~φ6.0
KSEL-2/YL-SED
Tungsten Carbide Endmill
A rich lineup of blade lengths for blade diameters
Size : φ0.1~φ6.0